Below you will find instructions for using the Cocaine Purity Test kits.

Step 1: Knock the unopened ampoule against a hard surface several times, so the liquid will flow down and any granules which may be sticking to the inside of the ampoule will fall downwards.

Step 2: Take the top of the ampoule between the thumb and index finger, and snap off the top with the ampoule breaker. Open one buffer solution tube and insert all the liquid into the ampoule also.

Step 3: Use a spatula to insert the suspect material into the ampoule and slowly shake/swirl the ampoule for 5 seconds.

Step 4: Compare the colour from the reagent granulate with the colour chart below.

Step 5: Since these tests do not require acid neutralisers, you may throw the used ampoules in the trash or glass recycling bin.

If inconclusive or if you doubt the result, always get the suspected sample analysed by a laboratory.

Note: there might always be some variation in the colour reactions due to the composition of the compound.

Disclaimer: Use of this test is at your own risk. This is a presumptive test. This product will only give an indication about the identity of the substances present in the sample and cannot offer a 100% guarantee.

No rights or claims can be derived from (the use of) this test. The manufacturer or supplier cannot be held liable for damages and/or incidents as a result of this test.

There is always a chance that the sample contains a substance that will or will not be detected by this test.

Warning: Do not ingest. Do not inhale fumes. Do not bring in contact with eyes, skin and clothing. Possibly irreversible effects. Keep locked up and out of reach from children. In case of eye contact: rinse with a lot of water and seek medical advice immediately. Wear protective clothing and gloves. In case of an incident or when feeling unwell: seek medical advice immediately. Use only in well-ventilated areas.